Hollyland LARK M2S USB-C Wireless Microphone, 2×7g Titanium-Clip TX, 48kHz/24-bit, ENC, 300m Range, 27H Battery, 116dB SPL, Mobile Charging Case, or iPhone 15/16/17 and Android

Expert Features Invisible No-Logo Wear : The LARK M2S uses a discreet logo-free microphone body that stays visually subtle on clothing, keeping attention on the creator rather than the microphone. Titanium Clip-On Design : Its innovative titanium clip combines low weight with strong structural stability, helping the microphone stay securely attached even during active movement. Featherweight 7g Transmitter : Each transmitter weighs only approximately 7g , minimizing fabric pull, sagging, and discomfort during long interviews, reels, livestreams, classes, or mobile shooting sessions. 48kHz / 24-bit Recording : Captures audio at 48kHz / 24-bit , preserving vocal detail and giving creators cleaner, more natural recordings than basic mobile-mic solutions. 70dB+ Signal-to-Noise Ratio : With an SNR greater than 70dB , the LARK M2S keeps background electronic noise low so speech stays clearer and more defined. 116dB SPL Handling : Handles sound pressure levels up to 116dB SPL , giving the microphones useful headroom when recording energetic speakers and louder sources. Dual-Level ENC : Environmental Noise Cancellation suppresses low-frequency environmental noise, while the LarkSound App provides Strong and Weak cancellation levels for different recording environments. 300m Wireless Range : The USB-C Mobile Version reaches up to 300m / 1,000ft line-of-sight , with up to 60m / 200ft non-line-of-sight transmission under Hollyland’s stated test conditions. RF Interference-Resistant Circuit : Hollyland integrates a dedicated RF interference-resistant circuit plus 2.4GHz Adaptive Frequency Hopping , helping maintain stable audio in offices, streets, event venues, and other signal-heavy environments. 27-Hour Mobile Battery System : Each transmitter offers approximately 9 hours of operation, while the USB Type-C Version’s mobile charging case extends total use to approximately 27 hours . Fast Mobile Charging Case : The 680mAh Mobile Version Charging Case can recharge both transmitters together more than twice and itself charges in less than 1.5 hours . USB-C Plug & Play : Connect the compact USB-C receiver directly to a compatible USB-C mobile device—no complicated pairing procedure or audio cable is required. Playback Without Unplugging : Compatible phones can play back recorded clips without removing the USB-C receiver, allowing an immediate audio-quality check after recording. Charge Your Phone While Recording : The receiver’s USB-C charging port can accept a charging cable while connected to a smartphone, helping keep the phone powered during extended recording sessions. Pre-Paired Out of the Box : The two transmitters and receiver automatically pair after initial setup, getting creators from case to recording in seconds. LarkSound App Control : Monitor battery level, volume information, VU-meter activity, noise-cancellation level, and perform firmware updates directly through the mobile app. Expert Specs Specification Hollyland LARK M2S USB Type-C Version Product Type Dual-Transmitter Wireless Lavalier Microphone System Exact Version USB Type-C / USB-C Plug Mobile Version Transmitters Included 2 × LARK M2S TX Receiver Included 1 × USB-C Mobile Receiver Camera Receiver Included No Lightning Receiver Included No Microphone Design Logo-Free, Discreet Clip-On Clip Material / Design Titanium Clip-On Structure TX Weight Approx. 7g TX Dimensions Front: 13 × 6.3mm ; Rear: 24 × 9mm Microphone Polar Pattern Omnidirectional Microphone Sensitivity -37dBV ±2dB @ 1kHz, 94dB SPL Frequency Response 20Hz–20kHz Sample Rate 48kHz Bit Depth 24-bit Signal-to-Noise Ratio >70dB Maximum SPL 116dB SPL Noise Cancellation Environmental Noise Cancellation Noise Cancellation Levels Strong / Weak , adjustable through LarkSound Wireless Modulation GFSK 2Mbps Wireless Technology 2.4GHz Adaptive Frequency Hopping (AFH) USB-C Version LOS Range Up To 300m / 1,000ft USB-C Version NLOS Range Up To 60m / 200ft RF Protection RF Interference-Resistant Circuit TX Battery Voltage 3.87V TX Battery Capacity 85mAh TX Operating Time Approx. 9 Hours TX Charging Time Approx. 1 Hour Mobile Charging Case Capacity 680mAh Mobile Charging Case Voltage 3.8V Charging Case Recharge Capability >2 Full Charges For Both TX Simultaneously Total Mobile-Version Battery Life Approx. 27 Hours With Charging Case Charging Case Charging Time <1.5 Hours Charging Temperature 0°C–45°C Operating Temperature -10°C–45°C USB-C Receiver Dimensions Approx. 40 × 16.7 × 9mm USB-C Receiver Weight Approx. 6g Mobile Charging Case Dimensions Approx. 55.2 × 75 × 36.5mm Mobile Charging Case Weight Approx. 80g Receiver Connection Direct USB-C Plug & Play Yes Phone Charging While Connected Supported Through Receiver USB-C Charging Port Playback Without Removing Receiver Supported; function can be enabled/disabled in LarkSound Factory Pairing Automatic / Pre-Paired Setup Control App LarkSound App Information Battery / Volume / VU Meter App Functions Noise-Cancellation Adjustment / Firmware Upgrade / Settings Included Windscreens 2 × Furry Windshields Included Charging Cable 1 × USB-A to USB-C Cable